|
|
Dennys Paillacho, F. Novillo, W. Agila., & V. Huilcapi. (2015). Impacto de las redes de comunicaciones en los Sistemas Robóticos de Control. Revista Politécnica, Vol. 35, pp. 97–102.
Abstract: El análisis de incidencia que tienen las redes de comunicaciones sobre el comportamiento de los sistemas robóticos de control en red muestra grandes dificultades cuando se quieren hacer evaluaciones de tipo analítico. Por tal razón, en este trabajo un análisis que utiliza una aproximación basada en simulación es propuesto, de manera que el comportamiento temporal y espacial de un sistema robótico de control en red pueda ser evaluado. Para tal efecto, se propone un entorno de validación mediante el cual una red de comunicaciones permita distribuir mensajes de control entre el controlador principal y los controladores remotos ubicados en cada articulación angular del robot manipulador planar. Las interacciones entre los componentes del sistema han sido modeladas mediante un sistema de capas. Dicho modelo es llevado a un entorno de simulación con la finalidad de analizar el impacto de distintos parámetros de comunicaciones (i.e. tipo de red, tasa de datos y tamaño de datos) sobre el ciclo de comunicación y el error de seguimiento de trayectoria en un sistema robótico.
|
|
|
|
Miguel Realpe, Boris X. Vintimilla, & Ljubo Vlacic. (2016). Multi-sensor Fusion Module in a Fault Tolerant Perception System for Autonomous Vehicles. Journal of Automation and Control Engineering (JOACE), Vol. 4, pp. 430–436.
Abstract: Driverless vehicles are currently being tested on public roads in order to examine their ability to perform in a safe and reliable way in real world situations. However, the long-term reliable operation of a vehicle’s diverse sensors and the effects of potential sensor faults in the vehicle system have not been tested yet. This paper is proposing a sensor fusion architecture that minimizes the influence of a sensor fault. Experimental results are presented simulating faults by introducing displacements in the sensor information from the KITTI dataset.
|
|
|
|
Marta Diaz, Dennys Paillacho, & Cecilio Angulo. (2015). Evaluating Group-Robot Interaction in Crowded Public Spaces: A Week-Long Exploratory Study in the Wild with a Humanoid Robot Guiding Visitors Through a Science Museum. International Journal of Humanoid Robotics, Vol. 12.
Abstract: This paper describes an exploratory study on group interaction with a robot-guide in an open large-scale busy environment. For an entire week a humanoid robot was deployed in the popular Cosmocaixa Science Museum in Barcelona and guided hundreds of people through the museum facilities. The main goal of this experience is to study in the wild the episodes of the robot guiding visitors to a requested destination focusing on the group behavior during displacement. The walking behavior follow-me and the face to face communication in a populated environment are analyzed in terms of guide- visitors interaction, grouping patterns and spatial formations. Results from observational data show that the space configurations spontaneously formed by the robot guide and visitors walking together did not always meet the robot communicative and navigational requirements for successful guidance. Therefore additional verbal and nonverbal prompts must be considered to regulate effectively the walking together and follow-me behaviors. Finally, we discuss lessons learned and recommendations for robot’s spatial behavior in dense crowded scenarios.
|
|
|
|
Angel D. Sappa, Juan A. Carvajal, Cristhian A. Aguilera, Miguel Oliveira, Dennis G. Romero, & Boris X. Vintimilla. (2016). Wavelet-Based Visible and Infrared Image Fusion: A Comparative Study. Sensors Journal, Vol. 16, pp. 1–15.
Abstract: This paper evaluates different wavelet-based cross-spectral image fusion strategies adopted to merge visible and infrared images. The objective is to find the best setup independently of the evaluation metric used to measure the performance. Quantitative performance results are obtained with state of the art approaches together with adaptations proposed in the current work. The options evaluated in the current work result from the combination of different setups in the wavelet image decomposition stage together with different fusion strategies for the final merging stage that generates the resulting representation. Most of the approaches evaluate results according to the application for which they are intended for. Sometimes a human observer is selected to judge the quality of the obtained results. In the current work, quantitative values are considered in order to find correlations between setups and performance of obtained results; these correlations can be used to define a criteria for selecting the best fusion strategy for a given pair of cross-spectral images. The whole procedure is evaluated with a large set of correctly registered visible and infrared image pairs, including both Near InfraRed (NIR) and LongWave InfraRed (LWIR).
|
|
|
|
Miguel Oliveira, Vítor Santos, Angel D. Sappa, Paulo Dias, & A. Paulo Moreira. (2016). Incremental Scenario Representations for Autonomous Driving using Geometric Polygonal Primitives. Robotics and Autonomous Systems Journal, Vol. 83, pp. 312–325.
Abstract: When an autonomous vehicle is traveling through some scenario it receives a continuous stream of sensor data. This sensor data arrives in an asynchronous fashion and often contains overlapping or redundant information. Thus, it is not trivial how a representation of the environment observed by the vehicle can be created and updated over time. This paper presents a novel methodology to compute an incremental 3D representation of a scenario from 3D range measurements. We propose to use macro scale polygonal primitives to model the scenario. This means that the representation of the scene is given as a list of large scale polygons that describe the geometric structure of the environment. Furthermore, we propose mechanisms designed to update the geometric polygonal primitives over time whenever fresh sensor data is collected. Results show that the approach is capable of producing accurate descriptions of the scene, and that it is computationally very efficient when compared to other reconstruction techniques.
|
|
|
|
Ortiz J., Londono J., Novillo F., Ampuno A., & Chávez M. (2015). Determinación de Invariantes en Grandes Centros de Datos basados en Topología Fat-Tree. Revista Politécnica, Vol. 35, pp. 91–96.
Abstract: Durante los últimos años ha existido un fuerte incremento en el acceso a internet, causando que los centros de datos ( DC) deban adaptar dinámicamente su infraestructura de red de cara a enfrentar posibles problemas de congestión, la cual no siempre se da de forma oportuna. Ante esto, nuevas topologías de red se han propuesto en los últimos años, como una forma de brindar mejores condiciones para el manejo de tráfico interno, sin embargo es común que para el estudio de estas mejoras, se necesite recrear el comportamiento de un verdadero DC en modelos de simulación/emulación. Por lo tanto se vuelve esencial validar dichos modelos, de cara a obtener resultados coherentes con la realidad. Esta validación es posible por medio de la identificación de ciertas propiedades que se deducen a partir de las variables y los parámetros que describen la red, y que se mantienen en las topologías de los DC para diversos escenarios y/o configuraciones. Estas propiedades, conocidas como invariantes, son una expresión del funcionamiento de la red en ambientes reales, como por ejemplo la ruta más larga entre dos nodos o el número de enlaces mínimo que deben fallar antes de una pérdida de conectividad en alguno de los nodos de la red. En el presente trabajo se realiza la identificación, formulación y comprobación de dos invariantes para la topología Fat-Tree, utilizando como software emulador a mininet. Las conclusiones muestran resultados concordantes entre lo analítico y lo práctico.
|
|
|
|
Angel D. Sappa, Cristhian A. Aguilera, Juan A. Carvajal Ayala, Miguel Oliveira, Dennis Romero, Boris X. Vintimilla, et al. (2016). Monocular visual odometry: a cross-spectral image fusion based approach. Robotics and Autonomous Systems Journal, Vol. 86, pp. 26–36.
Abstract: This manuscript evaluates the usage of fused cross-spectral images in a monocular visual odometry approach. Fused images are obtained through a Discrete Wavelet Transform (DWT) scheme, where the best setup is em- pirically obtained by means of a mutual information based evaluation met- ric. The objective is to have a exible scheme where fusion parameters are adapted according to the characteristics of the given images. Visual odom- etry is computed from the fused monocular images using an off the shelf approach. Experimental results using data sets obtained with two different platforms are presented. Additionally, comparison with a previous approach as well as with monocular-visible/infrared spectra are also provided showing the advantages of the proposed scheme.
|
|
|
|
Ángel Morera, Á. S., A. Belén Moreno, Angel D. Sappa, & José F. Vélez. (2020). SSD vs. YOLO for Detection of Outdoor Urban Advertising Panels under Multiple Variabilities. In Sensors, Vol. 2020-August(16), pp. 1–23.
Abstract: This work compares Single Shot MultiBox Detector (SSD) and You Only Look Once (YOLO)
deep neural networks for the outdoor advertisement panel detection problem by handling multiple
and combined variabilities in the scenes. Publicity panel detection in images o ers important
advantages both in the real world as well as in the virtual one. For example, applications like Google
Street View can be used for Internet publicity and when detecting these ads panels in images, it could
be possible to replace the publicity appearing inside the panels by another from a funding company.
In our experiments, both SSD and YOLO detectors have produced acceptable results under variable
sizes of panels, illumination conditions, viewing perspectives, partial occlusion of panels, complex
background and multiple panels in scenes. Due to the diculty of finding annotated images for the
considered problem, we created our own dataset for conducting the experiments. The major strength
of the SSD model was the almost elimination of False Positive (FP) cases, situation that is preferable
when the publicity contained inside the panel is analyzed after detecting them. On the other side,
YOLO produced better panel localization results detecting a higher number of True Positive (TP)
panels with a higher accuracy. Finally, a comparison of the two analyzed object detection models
with di erent types of semantic segmentation networks and using the same evaluation metrics is
also included.
|
|
|
|
Rubio, G. A., Agila, W.E. (2021). A fuzzy model to manage water in polymer electrolyte membrane fuel cells. In Processes Journal. (Article number 904), Vol. 9(Issue 6).
Abstract: In this paper, a fuzzy model is presented to determine in real-time the degree of dehydration or flooding of a proton exchange membrane of a fuel cell, to optimize its electrical response and consequently, its autonomous operation. By applying load, current and flux variations in the dry, normal, and flooded states of the membrane, it was determined that the temporal evolution of the fuel cell voltage is characterized by changes in slope and by its voltage oscillations. The results were validated using electrochemical impedance spectroscopy and show slope changes from 0.435 to 0.52 and oscillations from 3.6 mV to 5.2 mV in the dry state, and slope changes from 0.2 to 0.3 and oscillations from 1 mV to 2 mV in the flooded state. The use of fuzzy logic is a novelty and constitutes a step towards the progressive automation of the supervision, perception, and intelligent control of fuel cells, allowing them to reduce their risks and increase their economic benefits.
|
|
|
|
Arias Alexandra. Ing., Peña Roxanna. Ing., Chávez Patricia. MSEE., & Basurto Juan. Ing. (2011). Análisis Comparativo de la Implementación de una PBX de Código Abierto instalada en un Servidor Tradicional y en un Enrutador Inalámbrico en términos de Calidad de Servicio en Redes Inalámbricas Amalladas. Revista Tecnologica ESPOL RTE, Vol. 24, pp. 1–6.
Abstract: El presente trabajo compara dos Implementaciones de Centrales Telefónicas VoIP de Código Abierto implementados sobre una Red Inalámbrica Amallada. El primero comprende la instalación de la PBX en un servidor tradicional y el segundo la instalación de una PBX en un enrutador inalámbrico. Nuestro objetivo es
determinar cuál de estos dos sistemas es superior en cuanto a calidad de servicio se refiere. Para determinar la mejor solución, realizamos un estudio técnico de los paquetes capturados durante diferentes pruebas, considerando parámetros como el ancho de banda, retardo y jitter. Nuestros métodos de análisis pueden ser utilizados para futuros trabajos con una mayor complejidad y número de enrutadores inalámbrico, así como establecer el grado de afectación y el comportamiento de las dos PBX cuando haya congestión en la red.
|
|
